Custom Master Sections  
  

 

 

 

Custom Master Section Product Details: The master section is configurable but in all cases it will consist of two parts. A 4RU card cage contains all the amplifiers, relay switchers, etc. and handles all input and output interfacing as well as audio routing and switching. The customizable control panels have local switching logic and straight-ahead high quality analog audio level controls.

The first control surface we built replaces the entire bottom center section of the Oram BEQ-24 and consists of three panel sections. These are shown as a finished product for an Oram or as an example of features and layouts for other versions. Custom mastering consoles versions are already in progress. Please email us with your needs. Panel 1 - Cue Sends (optional) Panel 2 - Source Select, Oscillator, Solo Functions. Panel 3 Control Room and Studio Loud Speaker selectors, Communications section, and 2 Mix Buss controls.   The Aux return controls disappear.

---

Panel 1	Cues
Three Cue Send Masters, identical, each have Four SOURCE SELECTS Column A Source (Explained Below) Column B Source (Explained Below) Stereo Buss Patch MUTE SOLO LISTEN BACK on/off for each cue "area" LEVEL control

---

Panel 2	Sources / Oscillator / Solos
Two columns of SOURCE SELECTS. Stereo and Aux are in both columns The one source from each column can be selected. These two sources can be summed and offset or either source can be offset to match levels. AUXES are available mono or if you hold one in row A and one in row B you get stereo
AUTO takes care of the auto mute function on the aux panel (this is ORAM specific) (In the 40 input we are replacing the aux master so it sums so you only have 10 pots instead of 30) SOLO LEVEL and indicator SOLO FRONT - allows you to solo OVER and adjust balance between your control room source so you can solo and still hear things in context
Oscillator Level Frequency On Three desinations, Stereo Buss, Slate, Busses

        
 Panel
        3

        
 Control room
        / Studio loud speakers / Communications / 2 Buss
 

           
          

            

              
Control Room

              LEVEL

              MUTE

              DIM with a DIM LEVEL control

              
SELECTS for Column A, Column B,
              Stereo Buss

              
SPEAKER SELECTS Four pairs A-D.
              D can be jumpered to engage mono automatically

              
MONITOR Swap Left / Right, Cut
              L, Cut R, Mono
            
          
        

        
 
 

           
          

            

              
SLS

              


              LEVEL

              MUTE

              
SELECTS for Column A, Column B,
              Stereo Buss, Control Room Follow
            
          
        

        
 


        
Communications

        
COMMS - two way talk back with
        listen back

        you can turn off the listen back on the cue panel

        LB is listen back only (you can SPY)

        


        All buttons are momentary, except when you are in "latch"
        mode

        A single tap of any Comms function will latch that function.


        Holding it down will not latch it.

        


        An infrared remote is also available

        
 

        
 

        
2 BUSS MASTER

        


        P&G 3000 series stereo fader

        
(1100 series optional)

        


        Buss Meter - Follows 2 Buss or Control Room

        Insert 1 in/out switching 

        Insert 2 in/out or Buss Cut - your choice